Return Type - RH Joist Hangers

The Return Type-RH Joist Hanger is designed for similar application to the Type SH but with the advantage of a return flange (25mm as standard ) which greatly increases lateral support by giving the top flange additional resistance to pull out. We would recommend the use of TYPE R return flange hangers wherever possible for all timber to brick applications.

As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600 compliant with BS6178: Part 1:1990 and to the requirements of BS5268.

Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2 and above. Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.

All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardized square twist nails.

• The Type–RH return top flange hanger hooks over the brick/block which greatly increases lateral support
• They have a 25mm return flange are made to suit 100mm blockwork
• N.B. Hangers 150mm deep and above are produced 10mm shallower to accommodate regularised timber

Other size variations made to order.