Bent 90 Degree At 100mm Galvanised Restraint Strap
Heavy Duty Lateral Galv Restraint Straps - Bent 90dg at 100mm
These Heavy-Duty Lateral / Horizontal Galvanised Restraint Straps are multi holed at 25mm offset centres. Galvanised straps are manufactured from hot dipped galvanised steel to BS EN 10346:2009 DX51D + G275.
Heavy duty restraint straps can be used for horizontal restraint applications such as tying timber roofs and floors into masonry walls. Designed in accordance with The Building Regulations, BS5268 Part 3 and other building standards for vertical and horizontal restraints and tested to BS EN845-1.
Restraint straps should be fixed using either 50mm long 6.0mm / No. 12 woodscrews (using wall plugs in masonry for vertical restraint) or 75mm x 4.0mm diameter galvanised nails into timber.
The length dimension given includes any bend or twist so is the overall length/girth of the strap.
- Ideal for connecting timber floor and roof systems to masonry walls
- Heavy duty restraint strap made from galvanised steel for a high corrosion resistance
- Can be used for vertical restraint such as holding down a wall plate.
- For lateral restraint against wind pressure and suction.
- Length measurement includes the bent section
- Heavy duty restraint straps are supplied in packs of 10
- Load bearing capacity: 8 kN
Light Duty Vertical Galv Restraint Strap - Bent 90dg at 100mm
These Light-Duty Vertical Galvanised Restraint Straps are multi holed at 25mm offset centres. Galvanised straps are manufactured from hot dipped galvanised steel to BS EN 10346:2009 DX51D + G275.
Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. Designed in accordance with The Building Regulations, BS5268 Part 3 and other building standards for vertical restraints and tested to BS EN845-1.
Restraint straps should be fixed using either 50mm long 6.0mm / No. 12 woodscrews (using wall plugs in masonry for vertical restraint) or 75mm x 4.0mm diameter galvanised nails into timber.
The length dimension given includes any bend or twist so is the overall length/girth of the strap.
- Heavy duty restraint straps are supplied in packs of 20
- Load bearing capacity: 4 kN