Straight Flute Router Cutters
Straight Flute Router Cutters
These are our most popular router cutters and are used predominantly for intumescent strips.
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
- Two flutes give a clean finish to cut edges.
- Has a TCT plunge centre tip.
Straight Flute Router Cutters
This is one of our most popular router cutters and is ideal for general purpose trimming & mortising, and for use with worktop jigs for cutting worktop joints, bolt recesses and sink/hob apertures in laminated chipboard and solid timber.
1/2" Shank.
A must for every kitchen fitter and joiner!
- Tungsten Carbide Tipped 1.5mm micro-granular tips for long cutter life. ?
- Ground Tip Face polished to 400-grit ensures accurate cutting.?
- Ground Bottom Clearance for optimum waste removal
- Safety K-Mark indicates the correct cutter shank position for maximum collet grip to prevent accidental cutter ejection. ?
- EN Shank Markings are etched on the shank for easily readable cutter and safety information.?
- Plastic Storage Container for maximum protection
| Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
|---|---|---|---|---|---|---|---|---|
| W501-016 | 12.7x50mm 1/2" TC Straight Flute Worktop Cutting Router Cutter | 1 | £15.4000 | £15.40 | ||||
Straight Flute Router Cutters
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
- Two flutes give a clean finish to cut edges.
- Has a TCT plunge centre tip.
| Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
|---|---|---|---|---|---|---|---|---|
| W501-3/81 | 12.7x32mm 3/81 1/4" TC Straight Flute Router Cutter | 1 | £33.4000 | £33.40 | ||||
Hinge Recess Cutter
Two flute TC cutter giving good chip clearance. 1/4" shank.
- Ideal for shallow lateral routing cuts such as recessing hinges.
- Corners will require final trimming square with a hand chisel or a corner chisel.
- Suitable for Trend Hinge & Lock Jigs.
Straight Flute Router Cutters
This 12.0x63mm 3/75 1/2" TC Straight Two Flute Router Cutter - 3/75X1/2TC – is for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Ideal for kitchen worktop joints and cut outs.
- Two flutes give a clean finish to cut edges
- Has a TCT plunge centre tip
| Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
|---|---|---|---|---|---|---|---|---|
| W501-3/75 | 12.0x63mm 3/75 1/2" TC Straight Two Flute Router Cutter - 3/75X1/2TC | 1 | £46.4700 | £46.47 | ||||