These A2 Stainless Standard Dome Head Rivets are corrosion resistant rivets for use outdoors and in wet conditions. Stainless rivets also perform well in wide temperature extremes.

Both the body and mandrel are made from stainless steel A2 (304).

Our Steel Standard Dome Head Rivets are a range of blind rivets (also known as pop rivets) used to join two or more materials together where access to the back side is limited. They consist of a cylindrical body and a mandrel, which is a metal pin that is pulled into the body during installation, creating a secure and tight joint.

These rivets are an open-end type which are very versatile and suitable for a wide range of applications where the joint doesn't require a sealed end.

The recommended hole size for a blind rivet is typically between 0.1mm to 0.2mm larger than the diameter of the body of the rivet. For example, if you are using a 4.8mm diameter blind rivet, the hole size should be between 4.9mm to 5.0mm.

These rivets have a steel body and steel BZP mandrel. A steel body rivet gives added strength over an aluminium version, but aluminium ones are easier to pull up and give more corrosion resistance in most applications than a steel body one would.