Our Torfix® Countersunk Head MSA Multi Substrate Concrete Screw Anchors are a very versatile and removable fixing which can be re-used in the same hole making them an ideal fixing for permanent or temporary anchoring in concrete, blocks, brick and stone.

These Torfix® screw anchors are ideal for fast installation with a powered impact wrench. Can be installed closer to edge than traditional expansion anchors. These anchors are available in a countersunk, hex flange and hexagon head options.

The first dimension of the sizing denotes the drill size required for the anchor. Please note that as the threads are wider than the drill holes size / shank thickness you will need to use a wider clearance hole in any plates or washers you are going through

• Removable and can be re-used in the same hole making them an ideal fixing for permanent or temporary anchoring
• Suitable for use in: Concrete, Concrete Blocks, Hollow Blocks, Perforated Brick, Solid Brick and Stone
• Superb insertion speed into pre-drilled holes
• Self-tapping thread design offers high pull out values
• Requires less torque to drive, saving time and battery life
• Suitable for ‘close to edge’ fixing

TX30 torx drive head - order our code W801-261 to ensure you have the correct bit!

For technical information and advice about this product please call our experienced sales team on 0800 594 44 44.

Our Torfix® Hexagon Flange Head MSA Multi Substrate Concrete Screw Anchors are a very versatile and removable fixing which can be re-used in the same hole making them an ideal fixing for permanent or temporary anchoring in concrete, blocks, brick and stone.

These Torfix® screw anchors are ideal for fast installation with a powered impact wrench. Can be installed closer to edge than traditional expansion anchors. These anchors are available in a countersunk, hex flange and hexagon head options.

The first dimension of the sizing denotes the drill size required for the anchor. Please note that as the threads are wider than the drill holes size / shank thickness you will need to use a wider clearance hole in any plates or washers you are going through

• Removable and can be re-used in the same hole making them an ideal fixing for permanent or temporary anchoring
• Suitable for use in: Concrete, Concrete Blocks, Hollow Blocks, Perforated Brick, Solid Brick and Stone
• Superb insertion speed into pre-drilled holes
• Self-tapping thread design offers high pull out values
• Requires less torque to drive, saving time and battery life
• Suitable for ‘close to edge’ fixing

10mm/AF drive head - order our code W901-310 to ensure you have the correct bit!

For technical information and advice about this product please call our experienced sales team on 0800 594 44 44.

Our Torfix® Hexagon Head MSA Multi Substrate Concrete Screw Anchors are a very versatile and removable fixing which can be re-used in the same hole making them an ideal fixing for permanent or temporary anchoring in concrete, blocks, brick and stone.

These Torfix® screw anchors are ideal for fast installation with a powered impact wrench. Can be installed closer to edge than traditional expansion anchors. These anchors are available in a countersunk, hex flange and hexagon head options.

The first dimension of the sizing denotes the drill size required for the anchor. Please note that as the threads are wider than the drill holes size / shank thickness you will need to use a wider clearance hole in any plates or washers you are going through - allow 2-3mm more than the drill size for clearance.

• Removable and can be re-used in the same hole making them an ideal fixing for permanent or temporary anchoring
• Suitable for use in: Concrete, Concrete Blocks, Hollow Blocks, Perforated Brick, Solid Brick and Stone
• Superb insertion speed into pre-drilled holes
• Self-tapping thread design offers high pull out values
• Requires less torque to drive, saving time and battery life
• Suitable for ‘close to edge’ fixing

Don’t forget to order the correct drill bit for your fixings!

For technical information and advice about this product please call our experienced sales team on 0800 594 44 44.
 

The MSA Multi–Substrate Anchor is a new concept in fixing technology. It provides the construction profession with the following benefits!

• Self tapping multi–substrate anchor
• Thread provides safe anchorage over full embedment of anchor
• Threaded anchorage is not subject to expansion presure and maintains its fix without preload
• No expansion gives close to edge fixing ability
• One piece fixing for ease of installation and reduced cost
• Uses standard drill sizes

For technical information and advice about this product please call our experienced sales team on 0800 594 44 44.

These ITW Spit Tapcon Dome anchors are a self-tapping screw with dome head for fastening into cracked & non concrete substrates. They are a high performance low profile concrete screw anchor ideal for installing channel systems
Large diameter 17mm head to cover the channel systems slot. The 40mm long version will fasten up to 5mm fixture thickness and the 60mm 25mm.

•    ETA Option 1 approved anchor for cracked & non-cracked concrete
•    Fire rated up to 2 hours
•    New patented thread design provides easy setting and increased loads
•    Low profile dome allows for channel nut to move with the channel when fixed
•    Torx TX30 drive for easy installation between channel walls
•    6.0mm Drill Hole Size

The TAPCON HFL - Self tapping screw with hexagonal head is ideal for fastening into cracked & non-cracked concrete. ETA Approved, fire rated, industry leading high performance concrete anchor.

• Complete range ETA Option 1 can be used in cracked & non -cracked concrete
• Longer effective thread allows highest performance within the market
• New patented thread design provides easy setting
• Adjustable anchor for alignment situations when required without loss of performance
• C1 seismic approval for Ø6
• Fire approval