Metric H.S.G.T. Taps
M3 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M3 metric course thread requires a 2.5mm drill hole. We would recommend our W121-025 2.5mm HSS-G Ground Point Twist Drills for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-051 | M3x0.50 Metric H.S.G.T. Taper Tap | 1 | £4.1160 | £4.12 | ||||
W261-052 | M3x0.50 Metric H.S.G.T. Second Tap | 1 | £4.1160 | £4.12 | ||||
W261-053 | M3x0.50 Metric H.S.G.T. Bottom Tap | 1 | £4.1160 | £4.12 | ||||
W261-054 | M3x0.50 Metric H.S.G.T.Tap Set | 1 | £12.3270 | £12.33 |
M3.5 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M3.5 metric course thread requires a 2.9mm drill hole. We would recommend our W121-029 2.9mm HSS-G Ground Point Twist Drills for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-071 | M3.5x0.60 Metric H.S.G.T. Taper Tap | 1 | £4.4590 | £4.46 | ||||
W261-072 | M3.5x0.60 Metric H.S.G.T. Second Tap | 1 | £4.4590 | £4.46 | ||||
W261-073 | M3.5x0.60 Metric H.S.G.T. Bottom Tap | 1 | £4.4590 | £4.46 | ||||
W261-074 | M3.5x0.60 Metric H.S.G.T.Tap Set | 1 | £13.2790 | £13.28 |
M4 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M4 metric course thread requires a 3.3mm drill hole. We would recommend our W121-033 3.3mm HSS-G Ground Point Twist Drills for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-101 | M4x0.70 Metric H.S.G.T. Taper Tap (P) | 1 | £3.8080 | £3.81 | ||||
W261-102 | M4x0.70 Metric H.S.G.T. Second Tap | 1 | £3.8080 | £3.81 | ||||
W261-103 | M4x0.70 Metric H.S.G.T. Bottom Tap | 1 | £3.8080 | £3.81 | ||||
W261-104 | M4x0.70 Metric H.S.G.T.Tap Set | 1 | £11.3330 | £11.33 |
M5 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M5 metric course thread requires a 4.2mm drill hole. We would recommend our W121-042 4.2mm HSS-G Ground Point Twist Drills for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-201 | M5x0.80 Metric H.S.G.T. Taper Tap | 1 | £4.0460 | £4.05 | ||||
W261-202 | M5x0.80 Metric H.S.G.T. Second Tap | 1 | £4.0460 | £4.05 | ||||
W261-203 | M5x0.80 Metric H.S.G.T. Bottom Tap | 1 | £4.0460 | £4.05 | ||||
W261-204 | M5x0.80 Metric H.S.G.T.Tap Set | 1 | £12.0400 | £12.04 |
M6 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M6 metric course thread requires a 5mm drill hole. We would recommend our W121-050 5mm HSS-G Ground Point Twist Drills for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-301 | M6x1.00 Metric H.S.G.T. Taper Tap (P) | 1 | £3.9410 | £3.94 | ||||
W261-302 | M6x1.00 Metric H.S.G.T. Second Tap | 1 | £3.9410 | £3.94 | ||||
W261-303 | M6x1.00 Metric H.S.G.T. Bottom Tap (P) | 1 | £3.9410 | £3.94 | ||||
W261-304 | M6x1.00 Metric H.S.G.T.Tap Set | 1 | £11.7670 | £11.77 |
M8 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M8 metric course thread requires a 6.8mm drill hole. We would recommend our W121-068 6.8mm HSS-G Ground Point Twist Drills for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-401 | M8x1.25 Metric H.S.G.T. Taper Tap (P) | 1 | £4.5290 | £4.53 | ||||
W261-402 | M8x1.25 Metric H.S.G.T. Second Tap (P) | 1 | £4.5290 | £4.53 | ||||
W261-403 | M8x1.25 Metric H.S.G.T. Bottom Tap (P) | 1 | £4.5290 | £4.53 | ||||
W261-404 | M8x1.25 Metric H.S.G.T.Tap Set | 1 | £13.6010 | £13.60 |
M10 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M10 metric course thread requires a 8.5mm drill hole. We would recommend our W121-085 8.5mm HSS-G Ground Point Twist Drills for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-501 | M10x1.50 Metric H.S.G.T. Taper Tap | 1 | £5.6350 | £5.64 | ||||
W261-502 | M10x1.50 Metric H.S.G.T. Second Tap | 1 | £5.6280 | £5.63 | ||||
W261-503 | M10x1.50 Metric H.S.G.T. Bottom Tap (P) | 1 | £5.6420 | £5.64 | ||||
W261-504 | M10x1.50 Metric H.S.G.T.Tap Set (P) | 1 | £17.7520 | £17.75 |
M12 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M12 metric course thread requires a 10.2mm drill hole. We would recommend our W121-102 10.2mm HSS-G Ground Point Twist Drills for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-601 | M12x1.75 Metric H.S.G.T. Taper Tap | 1 | £8.6590 | £8.66 | ||||
W261-602 | M12x1.75 Metric H.S.G.T. Second Tap | 1 | £8.6590 | £8.66 | ||||
W261-603 | M12x1.75 Metric H.S.G.T. Bottom Tap | 1 | £8.6590 | £8.66 | ||||
W261-604 | M12x1.75 Metric H.S.G.T. Tap Set (P) | 1 | £25.9420 | £25.94 | ||||
W261-6902 | M14x2.0 Metric H.S.G.T. Second Tap | 1 | £10.9270 | £10.93 |
M16 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M16 metric course thread requires a 14.0mm drill hole. We would recommend our W151-140 14.0mm HSS Blacksmiths drill for use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-701 | M16x2.00 Metric H.S.G.T. Taper Tap | 1 | £12.3900 | £12.39 | ||||
W261-702 | M16x2.00 Metric H.S.G.T. Second Tap | 1 | £12.3900 | £12.39 | ||||
W261-703 | M16x2.00 Metric H.S.G.T. Bottom Tap | 1 | £12.3900 | £12.39 | ||||
W261-704 | M16x2.00 Metric H.S.G.T.Tap Set | 1 | £37.1700 | £37.17 |
M20 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M20 metric course thread requires a 17.5mm drill hole. We would recommend our W151-175 17.5mm HSS Blacksmiths drill or use with this tap.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-801 | M20x2.50 Metric H.S.G.T. Taper Tap | 1 | £21.8470 | £21.85 | ||||
W261-802 | M20x2.50 Metric H.S.G.T. Second Tap | 1 | £21.8470 | £21.85 | ||||
W261-803 | M20x2.50 Metric H.S.G.T. Bottom Tap | 1 | £21.8470 | £21.85 | ||||
W261-804 | M20x2.50 Metric H.S.G.T.Tap Set | 1 | £65.4570 | £65.46 |
M24 Metric H.S.G.T. Taps
Our Metric H.S.G.T. Taper Taps are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general purpose tap made to ISO 529 dimensions. These taps are right hand thread with a taper thread.
These taps require a pre-drilled hole into the steel. An M24 metric course thread requires a 21mm drill hole.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-921 | M24x3.00 Metric H.S.G.T. Taper Tap | 1 | £30.3030 | £30.30 | ||||
W261-922 | M24x3.00 Metric H.S.G.T. Second Tap | 1 | £30.3030 | £30.30 | ||||
W261-923 | M24x3.00 Metric H.S.G.T. Bottom Tap | 1 | £30.3030 | £30.30 | ||||
W261-924 | M24x3.00 Metric H.S.G.T.Tap Set | 1 | £90.9300 | £90.93 |
M30Metric H.S.G.T. Taps
Our Metric H.S.G.T. Second cut taps are our most popular style of tap. They are a high-speed steel ground metric coarse straight flute full size taps used as machine taps or by hand for tapping in free cutting Steel up to 800N/mm2. They are an uncoated general-purpose tap made to ISO 529 dimensions. These taps are right hand thread with a second cut thread.
These taps require a pre-drilled hole into the steel. An M30 metric course thread requires a 26.5/27mm drill hole.
NB: Please note the image of the tap is representative only and doesn’t not necessarily show the size/style exactly.
Code | Description | Stock Status | Box Quantity | Unit Price | Price per Box | Quantity Required | Add To | |
---|---|---|---|---|---|---|---|---|
W261-952 | M30x3.50 Metric H.S.G.T. Second Tap | 1 | £51.9260 | £51.93 |